Soft And Hard Combination Printed Circuit Board Fabrication Carbon Ink
Printed Circuit Board Fabrication Description:
1. High reliability
Through a series of technical means such as inspection, testing, and aging tests, the PCB can be guaranteed to work reliably for a long time (usually 20 years).
Requirements for various properties of PCB (electrical, physical, chemical, mechanical, etc.) can be achieved through design standardization, normalization, etc. In this way, the design time is short and the efficiency is high.
PCB adopts modern management, which can realize standardization, scale (quantization), and automatic production, so as to ensure the consistency of product quality.
A relatively complete test method and test standard have been established, and the qualification and service life of PCB products can be detected and identified through various test equipment and instruments.
Printed Circuit Board Fabrication Parameters:
|Copper Thickness||0.3-12 oz|
|Min Mechanical Hole||0.1mm|
|Min Laser Hole||0.075mm|
|Max Aspect Ratio||20:01|
|Max Board Size||650mm*1130mm|
|Min Outline Tolerance||±0.1mm|
|Min PP Thickness||0.06mm|
|Materials||FR4, High-Tg FR4, Rogers, Nelco, RCC, PTFE, M4, M6, TU862, TU872|
|Surface Finished||HASL, HASL Pb Free Immersion Gold/Tin/Silver Osp, Immersion Gold+OSP|
|Special Capability||Gold Finger Plating, Peelable, Carbon ink|
Printed Circuit Board Fabrication Introduction:
The printed circuit board has good product consistency, and it can adopt a standardized design, which is conducive to the realization of mechanization and automation in the production process. At the same time, the entire printed circuit board that has been assembled and debugged can be used as an independent spare part, which is convenient for the exchange and maintenance of the whole product. At present, printed circuit boards have been widely used in the manufacture of electronic products.